Matot offers a variety of standard features allowing you to custom
fit the dumbwaiter of your choice to the needs and design of your
building.
Manual & Power-Operated Gates and Doors
Matot offers an assortment of dumbwaiter doors and gates. Doors are
constructed with hollow metal panels and welded frames. Panels and
frames are furnished in stainless or carbon steel. All Matot doors
carry a 1 1/2 hour U.L. fire rating, and have been tested and approved
for installation in masonry or gypsum board wall construction.
Bi-Parting Doors (Standard)
Will fit the requirements of most dumbwaiter applications.
Slide Up Doors
Use when pit depth is restricted on floor-loading dumbwaiters.
Slide Down Doors
Use when overhead clearance is restricted.
Swing Doors
Use when overhead or floor to floor dimensions are restricted.
Machine Access Doors
Hinged door; furnished with keyed cylinder lock and self closing
device.
Drawbridge
Provides smooth entrance and exit for wheeled carts. For use with
bi-parting gates and hoistway doors only. Drawbridge is raised and
lowered by the opening of the car gate.
Door Locking Devices (Standard)
Complete line of hoistway door locking devices, including single or
double contact locks (U.L./C.S.A. approved).
Power Operation
Power operated doors and gates designed for counter height and floor
loading applications.
High Performance Intercom System
Increases efficiency and usefulness of dumbwaiter by providing direct
contact between sending and receiving floor.
Matot Electronic Chime (Standard)
Available in three voltage ranges from 24-120 volts AC/DC. Fits most
new or existing features.
Full Supporting Tower
Required in installations having non-load bearing shaft walls. Extends
the full height of the hoistway.
Guide rails and all components mount to tower.
