|


|
  |

click
for brochure (452 K) |
 |
Spectra Lift®
Features
Specifications
Colors
Unit
Dimensional Drawings
Shipping Weights and Dimensions
Price Lists and Order Forms |
|
Features:
SpectraLift’s fiberglass exterior
offers an aesthetic appeal that traditional wheelchair lifts don’t come
close to matching. And that’s good news, especially when complementing a
building’s architecture and design is a priority. But even better news is
that SpectraLift’s good looks are far from “skin deep.” You see, from the
beginning, we set out to design the ultimate vertical wheelchair lift – a
unit that delivers the kind of performance and reliability that lets you
install it – and forget about it! And we back our confidence in
SpectraLift with a 5-year parts warranty. That’s product confidence no
other manufacturer comes close to!
SpectraLift is ideal for a wide variety of applications – inside and
outside.
Rust and corrosion are never a worry with SpectraLift. Its fiberglass
exterior enables it to stand up to the most inclement weather conditions
and stay looking like new for a very, very long time. And inside, all
electrical components and connections are completely waterproof. Boat
docks, building entrances, amusement parks, stadiums, stages… the
possibilities are virtually endless.
Stylish design – in any color you can name.
More often than not, an exposed wheelchair lift is going to look like an
“add-on.” It’s just the nature of the machine. But SpectraLift makes that
add-on about as appealing as it can be. Its fiberglass exterior features
soft curves and recesses, and fewer seam lines than traditional units. And
with 20 standard colors to choose from – and custom colors at no extra
charge – SpectraLift can become a complementary part of most any
environment.
Installation is easy.
SpectraLift comes fully or partially assembled and tested from our factory
in Harrisburg, Pennsylvania. And because of that, installation is no great
shakes.
We didn’t reinvent the mechanics of vertical
wheelchair lifts. We made them better.
The inner workings of SpectraLift are set up similar to other vertical
wheelchair lifts, but with one important exception – we’ve gone to great
lengths to eliminate all their “bugs.” Bottom line: with SpectraLift, you
get the best of what’s out there, without the headaches. That also means
training for your technicians will be minimal.
click
for brochure (452 K)
Top
|
Specifications:
|
Dimensions: |
Tower: 11" x 43" x 81"
Platform: 36" x 51" x 42"
Toe Guard: 50" x 58" x 61"
Total Footprint: 59" D x 58" W |
|
Material: |
Platform, tower & ramp: Rust-free, fiberglass, non-skid surface
Internal components: Steel with anti-rust primer
|
|
Bridge Optional:
|
Polished aluminum, non-skid surface |
|
Color:
|
Twenty pre-mixed standard colors, custom colors available |
|
Capacity:
|
750 pounds
|
|
Lift:
|
54 inches |
|
Motor: |
24 VDC |
|
Power:
|
Two 12 volt, 33AH sealed maintenance-free batteries, in series and
charged with automatic 115 VAC powered, 24 VDC 10 Amp battery charger,
with automatic charger switches that charge rates to maintain full
service capacity |
|
Drive:
|
Two 7500 lb. tensile strength leaf chains, single stage constant
displacement sealed hydraulic cylinder 1 GPM, and a 1250 PSI pump,
providing a lift speed of 20 feet per minute |
|
Control Switches:
|
24 VDC up-down switches with constant pressure and key operation |
|
Safety Devices:
|
Slack chain safety device stops unit in the down direction in the
event that the leaf chain becomes slack. Units without toe guard
(enclosure) will have a diaphragm mounted beneath the platform, which
will shut down the lift if an obstruction is encountered. |
|
Manual Operation:
|
Operational in down direction |
|
Ramp:
|
44 inches, non-skid, stationary, aluminum diamond plated |
|
Pit:
|
62" x 58-1/8" x 3-3/4" |
|
Hand Rail:
|
One ADA-compliant, stainless steel grab bar mounted on platform |
Consult your local codes before ordering
Warranty
5-Year warranty on all parts (excluding batteries)
2-Year unconditional and an additional
3-Year based on extended warranty via service contract with certified
dealer.
Labor not included.
|
Top
Spectra Lift® Colors
Fiberglass exterior
available in 20 standard colors as well as most any custom color - at no
extra charge.

Top
|
Unit Dimensional Drawings:
|
Platform Configuration
|
Format |
|
SpectraLift-54 Right Hand, 2 landings |
PDF
/ DWG
/ DXF
|
|
SpectraLift-54 Left Hand, 2 landings |
PDF
/ DWG
/ DXF
|
Top
|
Shipping Weights and Dimensions:
This
section is still under
construction.
| Approximate
Shipping Weight |
Approximate
Crated Dimensions |
| |
|
|
|
Top
|
Spectra Lift®
Price List and Order Forms:
Effective 11/18/02
Standard Configuration
Up to 54" of travel
Platform, tower, ramp and toe guard made of fiberglass
Drive provided by single state constant displacement
Sealed hydraulic cylinder
Powered by two 12 volt batteries and charged with
Automatic 24VDC amp battery charger
40" non-skid stationary ramp
One ADA compliant stainless Steel grab rail
Available in 20 standard colors
All options must be ordered with the system for above pricing.
|
Platform Lift Order Forms
|
|
Description |
Format |
|
|
|
|
|
|
Top
|
Spectra Lift® and
Inclinator® VL are registered trademark of Inclinator
Company of America. |