|
|
 |
click
for brochure (1,351 K) |
 |
Electra-Ride III
The Bruno Electra-Ride III sets a new standard in
custom rail stairlift design offering
a smooth ride both up and down the
stairs and through the turns, a ride
unequalled in the industry. Finally, you don't have to
sacrifice ride quality and dependability with a turning stairlift
anymore.
Features
Specifications
Unit
Dimensional Drawings
Shipping Weights and Dimensions
Price Lists and Order Forms |
|
Electra-Ride
III Features:
Battery-Powered
Operation
The Electra-Ride line is the standard of
excellence in battery powered stairlifts,
and represents the finest product of its
kind available today. This unique leading
edge technology assures you of access even
if electrical service to your home is
interrupted, and reduces the chance of
being stranded between floors. The unit's
two 12-volt batteries are continuously
charged by a state-of-the-art battery
charger that plugs into any household
outlet, and no dedicated circuit is required, unless mandated by local
codes.
Precise, Reliable
Drive Unit
The Electra-Ride III gives you a smooth,
powerful drive system that combines a
self-locking worm gear and rack &
pinion design. This provides for safe
operation and long lasting durability for
years to come. A soft-start, solid state
controller gives you a secure, comfortable
ride and includes an adjustable speed
control that lets you select a comfortable
riding speed that makes every trip a
pleasure. The Electra-Ride III is rated
for rider weights up to 350 lbs. and
custom seating sizes are available. Our
own ergonomically custom designed
upholstered seats are an attractive
addition to your stairway.
Convenient
Installation
In addition to peace of mind,
battery-powered means you benefit from a
simpler, easier installation, The rail can
be installed as close as 7" from the
wall, with an overall folded width of just
16-1/2". Stair treads are used to
anchor the unit, not the wall, and each
rail system and set of rail clamps is
custom engineered for your particular
stairway. Every Electra-Ride III is
designed specifically for the intended
user, to provide the best possible
performance.
Value
Your Electra-Ride III is delivered fully
equipped, including a locking a swivel
seat and two call-send remote controls; a charging
indicator light at each end of the track; a footplate safety sensor
that stops the unit if there is an
obstruction on the stairway, a convenient
retractable seatbelt; and an adjustable
seat height feature for easier entry and
exit. An Easy-Slide seat means there is no
need to fold the seat. Just slip it back,
out of the way. A simple to use lever
raises and lowers the footplate. The
footplate and seat slide feature gives the
unit a very trim appearance when folded,
making use of the stairway by others much
more convenient.
Inside Turn
Applications
The Electra-Ride III now has additional
applications not available on most other
units on the market today. Our new inside turn option gives you the flexibility of having
your lift mounted on either side of the
staircase. These applications allow
installation when there is a doorway or
other obstruction along the outside of the
landing that would make a conventional
stairway lift impractical to put in.
Perfect for split-level or tri-level houses where a mid-level landing needs to be accessible
without blocking a door or room entrance.
Our tight radius and narrow rail lets you
keep the majority of your staircase
without obstructions.
Wrap-around Park Positions
Enjoy more clearance room on your
staircase when the unit is not in use by
parking the chair around a comer. Our
optional 90' and 180' park positions allow
for a cleaner, neater appearance in your
home and can move you away from the
staircase for entering and exiting the
unit. In addition, a park position will
reduce the amount of space normally
required on the bottom of the staircase.
click
for brochure (1,351 K)
Top
|
Electra-Ride
III Specifications:
|
APPLICATIONS: |
Straight
staircases, straight with top or
bottom overruns and straight with
intermediate landing. Variety of flat,
spiral, and custom staircase
configurations. |
|
RATED
LOAD: |
350
lbs. |
|
NUMBER
OF PASSENGERS: |
One |
|
POWER
SOURCE: |
24
Volt DC comprised of 2ea 7amp/hr 12
volt sealed maintenance-free lead-acid
batteries. |
|
CHARGER: |
110 Volt AC 1.5 Amp, 24 Volt DC 3 Amp
continuous monitoring, full primary
cut off, UL and CSA listed.
|
|
ELECTRICAL
REQUIREMENTS: |
A
standard household 110 Volt, 15
Amperes, 60 Cycles outlet located near
the top or bottom landing for the
charger. No additional dedicated
outlet is required unless mandated by local codes. |
|
DRIVE: |
24
Volt DC motor, 4 pole rated 1.32 hp
intermittent duty (2hr cont.) limited
at current setting, no load speed 3800
rpm. |
|
GEAR
BOX. |
20:1
Right angle single stage self locking
worm drive. |
|
INTERMEDIATE
REDUCTION: |
(Motor
& Gearbox) 3.75:1 5mm HTD with
dual 9mm wide belts. |
|
FINAL
DRIVE. |
8dp
rack welded to inside of rail with a
spur gear on the gearbox output shaft. |
|
MOTOR
CONTROLLER: |
24
Volt DC pulse width modulated
controller with acceleration ramping. |
|
BRAKING: |
Dynamic
motor braking through the motor
controller and self locking worm gear
box. |
|
REMOTE
CONTROL: |
Wall
mounted remote call/send controls with
charging station indicator lights
located at both the top and bottom
landings. |
|
STANDARD
CONTROL: |
3
position, momentary rocker switch
requiring user to continuously hold
rocker switch to control unit, switch
mounted under arm rest. |
|
SUPPORTS: |
Clamps
anchored to stair tread, normal rail
position is 3" above step nose.
Number of clamps dependent on the
length of rail. Optional height
adjustable clamps available. |
|
ANGLE. |
0
to 45 degrees standard. |
|
SPEED: |
User
adjustable with a maximum of 35 feet
per minute, actual loaded top speed 28
feet per minute. |
|
LENGTH
OF TRACK: |
Custom
length rails to 50'. |
|
TRACK
CONSTRUCTION: |
3/16"
gauge mild steel roll formed to shape,
gear rack welded on rail. Joints with
(3) welded on side clamp blocks at
each rail joint. |
|
TRACK
LOCATION: |
Track
is designed to the contour of the
stairway and can fit to within 7"
of the wall. |
|
TRACK
EXTENSIONS: |
Standard
track extension is 6" past the
top step nose and 18-20" past the
bottom step nose. |
|
FOOTREST. |
Folding
footrest with safety sensor panel and
handle actuator. |
|
SEAT. |
Padded,
sliding park position, &
self-locking swivel at both the top
and bottom. Four position seat height
adjustment. |
Top
|
Electra-Ride III Unit Dimensional Drawings:
|
Description |
Format
|
|
Bruno Electra-Ride III
Dimensions (2 pages)
|
PDF
|
Top
|
Electra-Ride III
Shipping Weights and Dimensions:
Bruno packages
their stairlifts for UPS shipping whenever possible. However, due to
the possible complexity of the Curved Rails on the Electra-Ride III,
it is sometimes necessary to ship via trucking lines.
| Approximate
Crated Dimensions |
Approximate
Shipping Weight in Lbs. |
| See
Bruno ER II and Elite for an approximation. This will vary
widely due to differences in the curved rail sections. |
Figure
at least 500 Lbs. |
|
|
Top
|
Electra-Ride III
Price List and Order Forms:
Effective October 28, 2006 (please
remember to add shipping charges)
Base
prices:
Includes complete rail kit with
standard rail clamps, seat, carriage,
footrest, obstruction safety panels on
the footrest, locking swivel top and
bottom, two wireless remote call/send
controls, final limit switch, swivel
safety switch, constant pressure
up-down control on armrest, two
armrests, seat belt and adjustable
seat height. Choose one of the base model configurations
listed below and then add any options. Please see the Stair
Measurement Sheets below for more complete descriptions and pictures
of turns. |
|
| Straight
Rail Models |
|
| Custom
Cut Straight Rail up to 20' |
$5,244.00 |
| Custom
Cut Straight Rail up to 20' with Top Overrun |
6,294.00 |
| Custom
Cut Straight Rail up to 20' with Bottom Overrun |
6,294.00 |
| Custom
Cut Straight Rail up to 20' with Top and Bottom Overrun |
7,135.00 |
| 90º
Turn Models |
|
| Flat
90 Turn with up to 25' of Rail |
9,444.00 |
| Spiral
90 Turn with up to 25' of Rail |
10,495.00 |
| Inside
90 Turn with up to 25' of Rail |
9,444.00 |
| 180°
Turn Models |
|
| Flat
180 Turn with up to 30' of Rail |
10,805.00 |
| Spiral
180 Turn with up to 30' of Rail |
11,544.00 |
| Inside
180 Turn with up to 30' of Rail |
10,805.00 |
|
|
| Options: |
|
| 10' Rail kit add-on
(Maximum rail length is 30') |
525.00 |
| 36"
Horizontal Overrun (Top or Bottom) |
1,340.00 |
| 90
degree Park Position (Top or Bottom) |
2,095.00 |
| 180
degree Park Position (Top or Bottom) |
2,514.00 |
| Additional
90 degree Turn on separate landing |
2,619.00 |
| Additional
180 degree Turn on separate landing |
2,935.00 |
| Special
Turns (other than 90 or 180 degrees) add for each turn |
520.00 |
| Rail
lengths beyond standard (Per foot) |
110.00 |
| Custom
cutting for rails: |
Included |
| Additional
remote transmitters (2 included in base price) |
110.00 |
| SRE-1550
Seat with Swing-Away arms |
220.00 |
Commercial
Package.
Includes overspeed brake, Keyed
call/send controls and keyed lock box
on chair. |
730.00 |
Residential
Keyed Package.
Includes Keyed call/send controls and
keyed lock box on chair. |
365.00 |
| Special
extended rail clamps: (price per
clamp) |
50.00 |
| Overspeed
brake |
460.00 |
Shipping
charge. Varies with rail configuration
Shipping via UPS "to your
door" in continental USA.
Please inquire about special shipping
charges to Alaska, Hawaii and
International. |
450.00+
By special quote |
Installation. Varies
with rail configuration
Professional installation at your home
or business takes about two days.
Outside of Seattle, WA please add
additional travel charges. |
3,000.00+
By special quote |
| All
options must ship with the original
order to qualify for this pricing.
WA State residents please add sales
tax. |
|
|
Click
below for Stair Measurement Sheet & Order Form
|
|
Description |
Format |
|
Bruno-All
Straight Rail models Order Form |
PDF
|
|
Electra-Ride III Standard Curve Rail
(4
pages) |
PDF
|
|
Electra-Ride III Custom Radius Rail (8 pages) |
PDF
|
Top
Top
|
|
